Physician
Otolaryngology (ENT)
Dr. Richard L. Price, DO
|
|
Give Review
Richard Price is an expert in the field of Otolaryngology (ENT). He graduated from University of Kansas School of Medicine. He over the years received 1 awards: "Fellow (FAAO-HNS)". Doctor Richard L. Price, DO is also a published doctor. He has 56 paper published. The most recent paper is: Comparison of the surface detail reproduction of flexible die material systems. Doctor Richard L. Price, DO accepts Medicare payments and is registered with Medicare.gov.
Publications
- Evaluation of ocular hazards from 4 types of curing lights.
- The effect of specimen temperature on the polymerization of a resin-composite.
- Intra- and inter-brand accuracy of four dental radiometers.
- Effect of distance on irradiance and beam homogeneity from 4 light-emitting diode curing units.
- Irradiance differences in the violet (405 nm) and blue (460 nm) spectral ranges among dental light-curing units.
- Knoop hardness of five composites cured with single-peak and polywave LED curing lights.
- Light energy matters.
- Factors affecting the energy delivered to simulated class I and class v preparations.
- Cellular inhibition produced by dental curing lights is a heating artifact.
- Quantifying light energy delivered to a Class I restoration.
- Irradiance uniformity and distribution from dental light curing units.
- Effect of configuration factor on shear bond strengths of self-etch adhesive systems to ground enamel and dentin.
- Knoop microhardness mapping used to compare the efficacy of LED, QTH and PAC curing lights.
- Effect of delivering light in specific narrow bandwidths from 394 to 515nm on the micro-hardness of resin composites.
- Temperature excursions at the pulp-dentin junction during the curing of light-activated dental restorations.
- Third-generation vs a second-generation LED curing light: effect on Knoop microhardness.
- Effect of reduced exposure times on the microhardness of 10 resin composites cured by high-power LED and QTH curing lights.
- Evaluation of a dual peak third generation LED curing light.
- Knoop hardness of ten resin composites irradiated with high-power LED and quartz-tungsten-halogen lights.
- Effects of resin composite composition and irradiation distance on the performance of curing lights.
- The effect of distance from light source on light intensity from curing lights.
- Effect of disposable infection control barriers on light output from dental curing lights.
- Effect of distance on the power density from two light guides.
- Comparison of quartz-tungsten-halogen, light-emitting diode, and plasma arc curing lights.
- Evaluation of a second-generation LED curing light.
- An evaluation of a technique to remove stains from teeth using microabrasion.
- The effect of two configuration factors, time, and thermal cycling on resin to dentin bond strengths.
- Effect of light source and specimen thickness on the surface hardness of resin composite.
- Effect of package weight on the total amount of die stone used annually in a dental school.
- Temperature transmission of high-output light-curing units through dentin.
- Interchangeability of two semiadjustable articulators.
- Light energy transmission through cured resin composite and human dentin.
- The pH of tooth-whitening products.
- Interchangeability of semiadjustable articulators after 2 to 7 years of use.
- Effect of stepped light exposure on the volumetric polymerization shrinkage and bulk modulus of dental composites and an unfilled resin.
- Effect of stepped vs. continuous light curing exposure on bond strengths to dentin.
- The effect of polishing on surface roughness of tissue conditioners.
- Margin adaptation of indirect composite inlays fabricated on flexible dies.
- Effects of composite thickness on the shear bond strength to dentin.
- Long-term reliability of semiadjustable articulator interchangeability.
- Esthetic restoration of a single-tooth dental implant using a subepithelial connective tissue graft: a case report with 3-year follow-up.
- In vitro comparison of 10-minute versus 24-hour shear bond strengths of six dentin bonding systems.
- Comparison of the surface detail reproduction of flexible die material systems.
- A review of preweighed, packaged die stone versus bulk die stone use in a dental school.
- Effects of home bleaching on the tissues of the oral cavity.
- Peel bond strengths of five impression material tray adhesives.
- The dimensional accuracy of 12 impression material and die stone combinations.
- Effects of changes in articulator settings on generated occlusal tracings. Part II: Immediate side shift, intercondylar distance, and rear and top wall settings.
- Effects of changes in articulator settings on generated occlusal tracings. Part I: Condylar inclination and progressive side shift settings.
- Use of a modified rubber dam technique when bonding resin-retained fixed partial dentures.
- Use of mouthguards during tooth preparation for patients with extreme tooth hypersensitivity.
- Potential errors when using a computerized pantograph.
- Micrographic and profilometric evaluation of the finish produced by diamond and tungsten carbide finishing burs on enamel and dentin.
- A comparison of articulator settings obtained by using an electronic pantograph and lateral interocclusal recordings.
- A comparison of articulator settings obtained using a computerized pantograph with settings obtained using a lateral check bite recording.
Schools
Kansas City College of Osteopathic Medicine
Doctors Specialties
- Osteopathic Manipulative Therapy
- Otolaryngology (ENT)
Accepted Insurances
- Choice Plus POS II
- American Enterprise Group
- American Republic
- Assurant Health
- Bakery & Confectionary Union Plan
- Blue Card PPO
- Commercial Insurance Company
- CoreSource
- Coventry Health Care
- Coventry Health Care of Kansas, Inc. PPO
- First Health (Coventry Health Care) PPO
- HealthPartners
- Humana
- Medicaid
- Medicare MCR
- Medico
- Old Surety Life Insurance CompanyMedicare MCR
- United Healthcare
Awards
- Fellow (FAAO-HNS)
Education
-
University of Kansas School of Medicine -
University of Oklahoma College of Medicine
Drug Facts
| NPI NUMBER | 1609832013 | |
| NPPES Provider LastName | PRICE | |
| NPPES Provider FirstName | RICHARD | |
| NPPES Provider ZIPCode | 675021105 | |
| NPPES Provider State | KS | |
| Specialty Description | Emergency Medicine | |
| Total Claim Count | 409.0 | |
| Distinct Opioid Count | 2.0 | |
| Opioid Claim Count | 81.0 | |
| Percent Opioid Claims | 19.8 |
Helpful Reviews
Medicare Facts
| National Provider Identifier [NPI] | 1609832013 |
| Last Name Of The Provider | PRICE |
| First Name Of The Provider | RICHARD |
| View All |
Similar Doctors
|
|
Dr. Larry J. Ensz, DO |
|
|
Dr. Robert Epp, MD
 This Doctor is OpenDoctor Recommended.
|
|
|
Dr. Alan N. Davidson, DO
This Doctor is OpenDoctor Recommended.
|
|
|
Dr. Wade A. Gaeddert, MD
This Doctor is OpenDoctor Recommended.
|